授業情報/Course information

開講学期/Course Start 2021年度/Academic Year  前期/First
開講曜限/Class period 金/Fri 3,金/Fri 4
授業区分/Regular or Intensive 週間授業
対象学科/Department 生産システム工学系専攻
対象学年/Year 1
授業科目区分/Category 博士前期課程 大学院自専攻科目
必修・選択/Mandatory or Elective 選択
授業方法/Lecture or Seminar 講義科目
授業科目名/Course Title 生産システム工学概論/Introduction of Manufacturing System
単位数/Number of Credits 2.0
担当教員名/Lecturer 風間俊治,水上 雅人,清水一道,佐々木 大地,船水 英希,成田幸仁,寺本孝司,松本大樹,藤木裕行,湯浅友典,花島直彦,相津佳永,長船康裕,河合秀樹
時間割コード/Registration Code MP248
連絡先/Contact 風間俊治(T. Kazama,46-5349,kazama@mmm.muroran-it.ac.jp)
水上 雅人(B314,m-mizukami@mmm.muroran-it.ac.jp)
河合秀樹(B219 / 0143-46-5304 / e-mail: hdkawai0@mmm.muroran-it.ac.jp)
長船康裕(教員室(Room No.):B201,osafune@mmm.muroran-it.ac.jp)
相津佳永(0143-46-5348,  Email: aizu@mmm.muroran-it.ac.jp, Y401)
花島直彦(教員室: B-312,hana@mondo.mech.muroran-it.ac.jp)
湯浅友典(Tel:0143-46-5347,E-mail:yuasa@mmm.muroran-it.ac.jp,Y305)
藤木裕行(B304
46-5323
fujiki@mmm.muroran-it.ac.jp)
松本大樹((B207) h_matsu@mmm.muroran-it.ac.jp
0143-46-5334)
寺本孝司(teramoto@mmm.muroran-it.ac.jp)
成田幸仁(B317
0143-46-5396
y-narita@mmm.muroran-it.ac.jp)
船水 英希(B309,funamizu@mmm.muroran-it.ac.jp)
佐々木 大地(部屋番号:B209
電話番号:0143-46-5310
E-mail:daichi@mmm.muroran-it.ac.jp)
清水一道(清水一道
(A227室 0143-46-5651 shimizu@mmm.muroran-it.ac.jp))
オフィスアワー/Office hours 風間俊治(T. Kazama,B319,Mon.13:00-14:00 in 1st semester [1st & 2nd quarters] / Mon.10:30-11:30 i in 2nd semester [3rd & 4th quarters] in the 2021 academic year)
水上 雅人(木曜日:16:30 - 17:30)
河合秀樹(金曜日 16:00ごろ)
長船康裕(木曜日(Thu) 13:00~14:00)
相津佳永(Tuesday 16:30-17:00)
花島直彦(水曜日5,6時限(ただし,会議などで不在の場合あり).これ以外の時間も在室時は対応可能.)
湯浅友典(Mon:16:00-17:00,Tue:13:00-14:00)
藤木裕行(火曜日 14:30~16:00)
松本大樹(火曜日 16:00-18:00)
寺本孝司(A204,水曜13:30-14:30,17:00-18:00)
成田幸仁(水曜日 12:55~14:25)
船水 英希(火曜日15:00~16:00)
佐々木 大地(毎週月曜日14:00~15:30)
清水一道(毎週月曜日15:00~17:00)
実務経験/Work experience
水上 雅人(通信事業を扱う企業でのロボット機構を含む光通信用自動化装置の開発経験を有する)


相津佳永(電機光学製品の研究開発事業を扱う企業での光計測システムの研究開発経験を有する)


藤木裕行(ガラスメーカーにおいて担当製造設備の機材設計に携わった在職経験を有する)




佐々木 大地(総合防食メーカーにおいて構造物の防食・補強施工に携わった在職経験を有する)
清水一道(鉄鋼メーカーにおいて熱管理および設計に携わった在職経験を有する)
更新日/Date of renewal 2021/03/05
授業のねらい
/Learning Objectives
The aim of the course is to teach students the specialized and cross-sectoral issues of mechanical engineering and robotics, including the research trends and topics of cutting edge element technology and systemization relating to production systems engineering.
到達度目標
/Outcomes Measured By:
On completion of this course, students should:
i) have up-to-date and cross-cutting knowledge of mechanical engineering and robotics
ii) explain element technology and systemization of domestic and international research trends
iii) state their own view of future technology in mechanical engineering and robotics
授業計画
/Course Schedule
Total class hours: 22.5 hrs
Q1-W1_Guidance[Aizu, Fujiki, Kazama]
Q1-W2_Mech-1: Energy and manufacturing systems in chemical, bio and energy [Kawai]
Q1-W3_Mech-2: Design with Computer Simulation for Casting industries [Shimizu]
Q1-W4_Mech-3: Corrosion engineering and its application [Sasaki]
Q1-W5_Mech-4: Residual stress and its measuring method [Fujiki]
Q1-W6_Mech-5: Measurement method for vibration mode and its application [Matsumoto]
Q1-W7_Mech-6: Prediction of future automobile industry and material processing research [Osafune]
Q1-W8_Robotics-1: Optical Application Measurement [Aizu]
Q2-W1_Robotics-2: Nondestructive testing system using optical interferometry [Funamizu]
Q2-W2_Robotics-3: Fundamental Technologies for Digital Machining [Teramoto]
Q2-W3_Robotics-4: Robot control [Hanajima]
Q2-W4_Robotics-5: Intelligent mechatronics system and software technology [Mizukami]
Q2-W5_Robotics-6: General Remarks of Power Transmission Systems [Narita]
Q2-W6_Robotics-7: Production management and information processing [Yuasa]
Q2-W7_Robotics-8: Overview of design in mechanical engineering and robotics [Kazama]
Q2-W8_(an optional extra day)
(subject to change)
This course meets once a week in the 1st and 2nd quarters.
The students should attend the class well prepared and review the lectures.
<Owing to the covid-19 situation, there is a possibility to change the course schedule and teaching methods.>
教科書・参考書に関する備考 The lectures will broaden the coverage of several textbooks and provide the latest scientific, engineering and technical information with the class note as well as handouts. No textbook is listed as a complete reference for this course. To access to the e-journals on the university library site and to read the related papers will be strongly recommended.
成績評価方法
/Grading Guidelines
- One report (term paper) in English (less than five A4 pages including a cover sheet, figures, tables, and references). The report should be typed and submitted on the appointed date (period) by a pdf or doc(x) file attached to the email. The topics of the report should be chosen from your other fields; namely, students in Mechanical Engineering Course should select one of the topics provided by Robotics Course, and vice versa. Review the topics, express your thoughts, and acknowledge the sources.
- Students who obtain a 60% + average over the reporting assignment pass the course (no resit). The assignment will be mainly assessed as follows: Structure, accuracy, clarity, effective use of figures and tables, application of materials and references, and your own analysis and interpretation.
<Owing to the covid-19 situation, there is a possibility to change the grading guidelines.>
履修上の注意
/Notices
Attend every class on time. Please let the lecturer know before the classes (or as soon as possible) if you will not be able to attend. Meet the deadline for the assignment. A lecture cancellation and change will be posted on the bulletin board of Mechanical Engineering and Robotics Course or announced in the classroom.
教員メッセージ
/Message from Lecturer
- International students should contact the lecturer prior to the course.
- Preparation and review are expected, including homework and assignments. A part may be replaced with a special lecture and an intensive course. A class may include exchange of opinions, group work, and debate.
学習・教育目標との対応
/Learning and Educational Policy
(T.B.D.)
関連科目
/Related course
All subjects in Mechanical Engineering Course and Robotics Course
備考
/Notes
The class will be opened jointly by Mechanical Engineering Course and Robotics Course.
No. 回(日時)
/Time (date and time)
主題と位置付け(担当)
/Subjects and instructor's position
学習方法と内容
/Methods and contents
備考
/Notes
該当するデータはありません
該当するデータはありません