授業情報/Course information

開講学期/Course Start 2017年度/Academic Year  前期/First 1st Qt,2nd Qt
開講曜限/Class period 火/Tue 7,火/Tue 8
授業区分/Regular or Intensive 週間授業
対象学科/Department 生産システム工学系専攻
対象学年/Year 1年,2年
授業科目区分/Category 博士前期課程 大学院自専攻科目
必修・選択/Mandatory or Elective 選択
授業方法/Lecture or Seminar 講義
授業科目名/Course Title 生産システム工学概論/Introduction of Manufacturing System
単位数/Number of Credits 2.0
担当教員名/Lecturer 風間俊治,清水一道,佐々木 大地,船水 英希,成田幸仁,寺本孝司,松本大樹,藤木裕行,湯浅友典,花島直彦,相津佳永,長船康裕,河合秀樹,水上 雅人
時間割コード/Registration Code MP247
連絡先/Contact 風間俊治(T. Kazama,5349,kazama@mmm.muroran-it.ac.jp)
水上 雅人(B314,m-mizukami@mmm.muroran-it.ac.jp)
長船康裕(教員室(Room No.):B201,osafune@mmm.muroran-it.ac.jp)
相津佳永(0143-46-5348    aizu(at)mmm.muroran-it.ac.jp)
花島直彦(教員室:B-312,hana@mondo.mech.muroran-it.ac.jp)
湯浅友典(Tel:0143-46-5347,E-mail:yuasa@mmm.muroran-it.ac.jp,Y305)
藤木裕行(B304
46-5323
fujiki@mmm.muroran-it.ac.jp)
松本大樹(居室 B207室
h_matsu@mmm.muroran-it.ac.jp)
寺本孝司(teramoto@mmm.muroran-it.ac.jp)
成田幸仁(B317
0143-46-5396
y-narita@mmm.muroran-it.ac.jp)
船水 英希(居室:B309
E-mail:funamizu@mmm.muroran-it.ac.jp)
佐々木 大地(部屋番号:B209
電話番号:0143-46-5310
E-mail:daichi@mmm.muroran-it.ac.jp)
清水一道(shimizu@mmm.muroran-it.ac.jp)
オフィスアワー/Office hours 風間俊治(T. Kazama,B319,Mon.16:30-17:30)
水上 雅人(木曜日:16:30 - 17:30)
長船康裕(木曜日(Thu) 13:00~14:00)
相津佳永(Tuesday 16:30-17:00)
花島直彦(火曜日7,8時限)
湯浅友典(Mon:16:00-17:00,Tue:13:00-14:00)
藤木裕行(火曜日 14:30~16:00)
松本大樹(火曜日 16:00-18:00)
寺本孝司(A204,水曜13:30-14:30,17:00-18:00)
成田幸仁(水曜日 12:55~14:25)
船水 英希(火曜日 15:00~17:00)
佐々木 大地(毎週月曜日14:00~15:30
)
清水一道(毎週火曜日)
更新日/Date of renewal 2017/03/21
授業のねらい
/Learning Objectives
The aim of the course is to teach students the specialized and cross-sectoral issues of mechanical engineering, including the research trends and topics of cutting edge element technology and systemization relating to production systems engineering.
到達度目標
/Outcomes Measured By:
On completion of this course, students should:
i) have up-to-date and cross-cutting knowledge of mechanical engineering
ii) explain element technology and systemization of domestic and international research trends
iii) state their own view of future of technology in mechanical engineering
授業計画
/Course Schedule
Total class hours: 12 hrs
1-01W_Guidance[Aizu, Fujiki, Kazama]
1-02W_Mech-1: Energy and manufacturing systems in chemical, bio and energy[Kawai]
1-03W_Mech-2: Design with Computer Simulation for Casting industries[Shimizu]
1-04W_Mech-3: Corrosion engineering and its application[D. Sasaki]
1-05W_Mech-4: Residual stress and its measuring method[Fujiki]
1-06W_Mech-5: High-performance and quality evaluation technology of cast iron for automotives[Osafune]
1-07W_Mech-6: Measurement method for vibration mode and its application[Matsumoto]
1-08W_Robotics-1: Optical Application Measurement[Aizu]
1-09W_(optional date)
2-01W_Robotics-2: Nondestructive testing system using optical interferometry[Funamizu]
2-02W_Robotics-3: Production management and information processing[Yuasa]
2-03W_Robotics-4: Robot control[Hanajima]
2-04W_Robotics-5: Intelligent mechatronics system and software technology[Mizukami]
2-05W_Robotics-6: General Remarks of Power Transmission Systems[Narita]
2-06W_Robotics-7: Fundamental Technologies for Digital Machining[Teramoto]
2-07W_Robotics-8: Overview of design in mechanical engineering and robotics[Kazama]
2-08W_Summary (turning in report) [Kazama]
(subject to change)
This course meets once a week in the 1st and 2nd quarters.
Preparation and review are expected, including homework and assignments. A part may be replaced with a special lecture and an intensive course. A class may include exchange of opinions, group work, and debate.
教科書・参考書に関する備考 The lectures will broaden the coverage of several textbooks and provide the latest scientific, engineering and technical information with the class note as well as handouts. No textbook is listed as a complete reference for this course. To access to the e-journals on the university library site and to read the papers will be strongly recommended.
成績評価方法
/Grading Guidelines
Students who obtain a 60% + average over the reporting assignment pass the course (no resit). The assignment will be assessed as follows: Structure, accuracy, clarity of communication, effective use of figures and tables, application of material and references, and your own analysis and interpretation.
One report (less than ten A4 pages including a cover sheet, figures, tables, and references) in English or Japanese. The report should be turned in on the appointed date.
履修上の注意
/Notices
Attend every class on time. Meet the deadline for the assignment. A lecture cancellation and change will be posted on the bulletin board of Mechanical Engineering and Robotics Course or announced in the classroom.
教員メッセージ
/Message from Lecturer
International students should contact the lecturer prior to the course.
学習・教育目標との対応
/Learning and Educational Policy
(T.B.D.)
関連科目
/Related course
All subjects in Mechanical Engineering Course.
備考
/Notes
The class will be opened jointly by Mechanical Engineering Course and Robotics Course.
No. 回(日時)
/Time (date and time)
主題と位置付け(担当)
/Subjects and instructor's position
学習方法と内容
/Methods and contents
備考
/Notes
該当するデータはありません
該当するデータはありません